MicroBT WhatsMiner M60S hosting

The MicroBT WhatsMiner M60S is an air-cooled ASIC miner designed for SHA-256 mining, including Bitcoin. The configuration covered here delivers 186 TH/s at 3,441 W, with an efficiency of 18.5 J/TH. These figures are manufacturer nominal values, not guaranteed operating results. Several hashrate bins exist, so the model name alone does not establish an individual unit’s specifications.

For a Teraminerhosting quote, identify the exact bin and provide the unit’s nameplate information. Hosting requirements should be matched to that configuration rather than inferred from another M60S listing.

Power and electrical requirements

At its nominal operating point, each miner draws 3.441 kW continuously. That represents approximately 82.6 kWh per day if it runs at nominal power for 24 hours; this is an energy estimate, not a billing commitment. Actual consumption can vary with operating conditions and configuration.

ASIC hosting commonly uses electrical distribution in the 200–277 V range, but that typical facility range is not confirmation that this miner accepts every voltage within it. Verify the installed power supply’s input rating before connection. At 240 V, 3,441 W corresponds to roughly 14.3 A before accounting for power factor or operating variation. A qualified electrical professional should select the branch circuit, compatible PDU outlet, plug, and cable for continuous duty and applicable electrical codes.

Cooling requirements and air handling

Nearly all electrical input becomes heat, so this M60S configuration produces approximately 3.44 kW of heat at nominal power. Hosting design must remove that heat continuously while supplying suitable intake air. Exhaust recirculation, restrictive ducting, and loaded filters can raise temperatures even when the room’s average temperature appears acceptable.

The miner’s specified cooling method is air, making air cooling the appropriate starting point without changing its intended cooling architecture. Effective deployment separates intake and exhaust paths, maintains airflow clearance, and controls dust. Site planning should also account for fan noise; an air-cooled ASIC is not suited to an ordinary quiet office environment.

Installation and commissioning

Before shipment or installation, confirm the hashrate bin, power supply rating, connector requirements, and any manufacturer handling instructions. Inspect incoming equipment for shipping damage, loose connections, and blocked airflow paths before applying power. Rack placement should support the unit securely without obstructing intake, exhaust, or service access.

Commissioning should include network connectivity, mining pool settings, worker identification, and secure management access. Record baseline hashrate, wall power, temperatures, fan behavior, and error indicators once operation stabilizes. These measurements help distinguish normal variation from installation problems and provide a reference for later troubleshooting.

Maintenance and operating checks

Air-cooled miners require attention to filters, fans, heatsinks, and electrical connections. Cleaning frequency should reflect actual dust loading and airflow conditions rather than an assumed universal schedule. Isolate power before physical service and follow manufacturer procedures to avoid equipment damage or electrical hazards.

Track sustained changes in hashrate, temperature, fan speed, and hardware errors. A rising temperature trend can indicate restricted airflow or exhaust recirculation, while repeated board errors warrant further diagnosis. Firmware changes should be controlled and documented, with settings checked against the intended operating profile.

Efficiency and hosting cost context

The nominal 18.5 J/TH rating expresses energy consumed per unit of hashing work; lower J/TH means better electrical efficiency at a comparable operating point. It does not establish profitability, which also depends on network conditions, mining revenue, and total expenses.

Use the hosting cost calculator for preliminary planning with 3,441 W as the nominal power input. Teraminerhosting pricing is quote-only; request a quote for the applicable hosting terms rather than treating a calculator estimate as an offer.