Canaan Avalon A1566 hosting overview

The Canaan Avalon A1566 is an air-cooled SHA-256 ASIC miner in the Avalon A15 series. Its manufacturer nominal values are 185 TH/s hashrate, 3,420 W power consumption, and 18.5 J/TH efficiency. It is designed for SHA-256 mining, including Bitcoin, rather than general-purpose computing or algorithms that require different hardware.

Hosting this model requires planning around sustained electrical demand and continuous heat removal. Actual operating figures can vary with ambient conditions, firmware, configuration, and hardware condition. For a Teraminerhosting deployment, request a model-specific quote and confirm electrical compatibility, installation requirements, and service scope before shipping equipment.

Power and electrical requirements

At its nominal rating, each A1566 represents a continuous 3.42 kW load, excluding any external cooling or facility overhead. If it operated continuously at that draw, miner-only energy consumption would be approximately 82.08 kWh per day. That is a planning calculation, not a guaranteed consumption figure.

ASIC hosting commonly uses 200–277 V distribution, but that typical range is not confirmation that this miner accepts every voltage within it. Verify the installed power supply’s nameplate and Canaan documentation before connection. The PDU, receptacles, connectors, and power cords must match the equipment and support sustained current. Branch circuits and protective devices need appropriate continuous-load sizing under applicable electrical codes; qualified electrical personnel should validate the installation.

Cooling requirements and airflow

Nearly all electrical input becomes heat, so nominal operation creates roughly 3.42 kW of heat per miner. Cooling design must supply sufficient intake airflow and remove heated exhaust without allowing it to recirculate into neighboring machines. Restricted intakes, crowded exhaust paths, and dirty filters can raise temperatures and interfere with stable operation.

The A1566’s specified cooling method is air, making air cooling the appropriate starting point for deployment planning. It uses the miner’s intended cooling architecture without requiring conversion to liquid or immersion cooling. Intake temperature, ventilation, filtration, and exhaust separation should be assessed together. Follow Canaan’s environmental limits rather than assuming that adequate room ventilation alone guarantees acceptable chip temperatures.

Installation and commissioning

Before installation, inspect the chassis, fans, connectors, and cables for shipping damage. Confirm the unit identity, power supply requirements, firmware source, and network configuration. Position the miner securely with unobstructed intake and exhaust clearance, following manufacturer installation guidance.

Commissioning should include pool and worker configuration, network connectivity checks, and verification that fans and hashboards report correctly. Compare stabilized hashrate and measured power with manufacturer nominal values, allowing for reporting intervals and operating conditions. Record baseline temperatures, fan behavior, rejected shares, and error logs so later changes can be investigated against an established reference.

Maintenance and operating checks

Air-cooled hardware needs ongoing attention to dust accumulation, fan condition, and airflow restrictions. Cleaning methods and intervals should follow manufacturer guidance and reflect the actual environment. Disconnect power before physical service, and reserve electrical repairs for qualified personnel.

Monitor temperature trends, fan faults, hashboard errors, and sustained hashrate changes. Before replacing components, distinguish hardware problems from pool connectivity, configuration, or cooling issues. Confirm maintenance responsibilities, repair authorization procedures, and any associated charges in the hosting agreement.

Efficiency and hosting cost context

The A1566’s nominal 18.5 J/TH describes energy use per unit of hashing work; lower J/TH generally means less miner electricity for equivalent hashrate. It does not establish profitability, which also depends on network conditions, mining revenue, fees, and total operating costs.

Use the hosting cost calculator for scenario planning, then request quote-only pricing from Teraminerhosting. Confirm which charges and services the quote includes rather than treating miner wattage alone as the complete hosting cost.