Canaan Avalon A15 Pro hosting overview

The Canaan Avalon A15 Pro is an air-cooled SHA-256 ASIC miner in the Avalon A15 series. Its manufacturer nominal specifications are 218 TH/s hashrate, 3,662 W power consumption, and 16.8 J/TH efficiency. These figures provide a planning baseline, not a guarantee of measured performance under every operating condition.

For hosting, the key requirement is a coordinated electrical and thermal plan: each miner represents a continuous load of roughly 3.7 kW, with nearly all consumed electrical energy becoming heat. Teraminerhosting pricing is quote-only; request a model-specific quote rather than assuming a standard rate or available deployment slot.

Power delivery and electrical requirements

At nominal operation, one A15 Pro consumes approximately 87.9 kWh per day before any separately accounted facility overhead. That makes supply compatibility, continuous-load sizing, and metering important parts of deployment planning. Actual consumption can vary with operating settings and conditions.

Hosting electrical distribution commonly uses 200–277 V, but this typical facility range must not be treated as confirmation that the A15 Pro accepts every voltage within it. Verify the installed power supply’s input label and current manufacturer documentation before connection. Match the PDU, receptacles, connectors, and power cords to the confirmed voltage and load requirements. A qualified electrical professional should determine circuit protection and continuous-load headroom under applicable codes; do not size a circuit from nominal watts alone.

Cooling requirements and airflow planning

The A15 Pro’s specified cooling method is air, so air cooling fits its intended configuration without requiring a conversion to liquid or immersion operation. A suitable arrangement delivers clean intake air and removes hot exhaust without allowing it to circulate back through the miner.

At 3,662 W, its approximate heat output is 12,500 BTU/h, calculated from nominal electrical consumption. Cooling design must account for the combined heat load of all deployed equipment, intake conditions, airflow restrictions, and fan operation. Keep intake and exhaust paths clear, and confirm manufacturer environmental limits before installation. Avoid treating room temperature alone as proof that individual miners receive adequate cooling.

Installation and commissioning notes

Before shipping or energizing a unit, confirm its exact model, power supply configuration, connector requirements, firmware status, and physical condition. Document serial numbers and visible shipping damage. Rack placement should preserve airflow clearance and allow access for inspection, cable service, and eventual removal.

Commissioning should include secure network configuration, mining pool and worker setup, and verification that the miner reports expected operating behavior. Check hashrate, power draw where measurable, temperature readings, fan behavior, and error logs after operation stabilizes. Investigate persistent departures from nominal performance rather than assuming every difference indicates hardware failure.

Maintenance and operational checks

Air-cooled miners need ongoing attention to dust accumulation, airflow obstruction, fan condition, and electrical connections. Establish inspection and cleaning intervals around the actual operating environment rather than assuming one schedule suits every installation. Cleaning and internal service should follow manufacturer procedures with appropriate shutdown and electrical isolation.

Trend hashrate, temperatures, fan readings, and reported faults to identify changes early. Use manufacturer-supported firmware and document configuration changes so troubleshooting can distinguish environmental issues, settings changes, and component faults.

Efficiency and hosting cost context

The nominal 16.8 J/TH rating expresses energy use per unit of hashing work; lower values indicate better electrical efficiency when compared on equivalent terms. It does not establish profitability. Network difficulty, mining revenue, realized performance, and hosting charges all affect economics.

Use the hosting cost calculator for scenario planning, then request a quote covering your specific deployment and service scope. Keep nominal miner consumption separate from any additional charges identified in the quote.